- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
heyswitz
on March 13, 2017
-
hi I gotta say I don,t understand all the problems u people are having with your 50f I have mine hooked into the oil furnace duct work and heats our whole storey and half farm house at 74 degrees...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank
on March 21, 2015
-
Frank from Canada again… I’ve been owning the F-50 Fahrenheit Endurance since 2008, which is hooked up to my existing oil furnace duct work. It’s wonderful! For the 2014/15...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank
on October 08, 2014
-
Hi everyone…
Frank again after a few postings I made since my first install of the F50 back in 2008, in Canada. This is now October 2014 and I’m still burning wood pellets...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
kiwiruss
on March 24, 2014
-
I bought this to replace my St Croix Revolution which has had nothing but issues and poor support from the manufacturer.
This Fahrenheit 50F is running like a champ. Its build quality is...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Gil Steil
on December 28, 2012
-
I’ve been trying to use my Endurance 50F for three years. I’ve been through 3 control board replacements and have replaced the burn pot with an upgraded pot. I’ve moved the...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
mnman
on December 13, 2011
-
This is the poorest investment I have ever purchased I sell/lease and work on dish machines for the largest instutional detergent company in the USA. We sell some poor...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Don
on December 27, 2010
-
This is my second winter with the 50f and my first review as I like to live with something for awhile before I give a opinion on it. In short this is one purchase that has exceeded my expections....
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
sd6394
on December 10, 2010
-
If your looking for a corn burning furnace look no further this blows the st croix outta the water
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank from Ottawa, Canada
on February 02, 2010
-
I’ve commented here a few times before and here’s my latest update:
This is my 2nd year using the F-50 and a lot of its performance depends on your location, how cold your...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
doug martin
on December 19, 2009
-
This is my 3rd year burning the Farenheit 50. The company has replaced my burn pot three times and the control board three times. I have not put one dime into these replacement parts. The only...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank
on September 29, 2009
-
My advice for the above review dated September 24, 2009:
(I have two more postings above.)
I solved every issues in a timely manner with the F-50 tech Mark Graham at...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
fahrenheit technologies endurance 50F
on September 24, 2009
-
I bought this stove Oct,2008 ,it worked ok1st week.Contacted salesman with problems smoking in house.He instructed to check pot assembly.It was installed incorrectly. The stove would put off...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank
on August 06, 2009
-
I kept a daily log during my first Canadian winter (2008-2009) using the 50F, which is hooked up to the existing oil furnace’s duct work. It definitely works, even at -30C (-22F) on our 30...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank M in New Hampshire
on February 28, 2009
-
I guess I’m a little confused with some of the comments listed here. The installation and cleaning directions are very straight forward. I performed the install myself following the...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
serviceman
on January 08, 2009
-
I worked as a service technician with many manufacture’s and am just giving my perspective. This is a very high maintenance unit. It is pushed as low maintenance however because the burn...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Robert E
on December 18, 2008
-
I purchaced my Fahrenheit furnace in Nov 2008.Installed it myself,had a lot of problems with the pot overflowing and the furnace shuting down.After talking with my dealer he explained that I...
- Fahrenheit Technologies Endurance 50F broke more than works
- Reviewed and rated by
Raymond B
on December 11, 2008
-
I purchased the unit on 02/09/08 during the two months after install it was down over half the time. The computer board was replaced twice. I have been trying to use it since Oct. 08 and it...
- Fahrenheit Technologies Endurance 50F
- Reviewed and rated by
Frank
on October 11, 2008
-
We just had our Fahrenheit Endurance 50F installed in Oct. 2008 here in Ottawa, Canada, and the heat that comes out of there from the wood pellets is awesome. Next week the intsallers will hook...